A na-emepụta ụfụfụ aluminom site na ịgbakwunye ihe mgbakwunye na aluminom dị ọcha ma ọ bụ aluminom alloy site na usoro ịfụfụ, ma nwee ma metal na afụ àgwà. Ọ nwere njupụta dị ala, ikike nnabata ujo dị elu, nguzogide okpomọkụ dị elu, nguzogide ọkụ siri ike, nguzogide corrosion, mkpuchi ụda na mbelata mkpọtụ, obere ikuku thermal, elu electromagnetic shielding, ike ihu igwe na-eguzogide, ike nzacha, nhazi dị mfe, nrụnye dị mfe, na elu. na-akpụ izi ezi , Enwere ike ịme mkpuchi mkpuchi elu.

Aluminom foamed bụ ụdị ọhụrụ igwe ọkụ ọkụ na-emepụta site na aluminom alloy foaming. Ọ nwere obere njupụta na elu kpọmkwem ike. Ọ nwere ọtụtụ ihe ndị mara mma dị ka ụda ụda na mkpuchi ụda, ntinye ike na nkwụsịtụ, nkwụsị ọkụ na ihe mgbawa. A na-eji ya eme ihe na mbara igwe ndị agha, ụgbọ okporo ígwè, mmepụta ụgbọ mmiri, wdg. ubi akụrụngwa. N'ime "Top Ten Kasị Ihe Ọhụrụ nwere ike ime n'ọdịnihu" nke ndị mgbasa ozi mba ọzọ họpụtara, ihe ụfụfụ aluminom họọrọ nke isii.

Anyị nwere ike hazie profaịlụ ụfụfụ aluminom nwere oghere dị iche iche, ọkpụrụkpụ na ihe achọrọ dị ka achọrọ imewe si dị.

1. Njirimara arụmọrụ

① dị arọ: Njupụta bụ 0.1-0.4 ugboro nke aluminom dara;

② Isi ike dị elu: ọ na-ehulata kpọmkwem isi ike bụ 1.5 ugboro nke ígwè;

③ Ọrụ nnabata ujo dị elu yana mmetụta nnabata ike:arụmọrụ damping bụ5-10ugboro nke aluminom metal. Porosity Mgbe ụfụfụ aluminom nwere ọnụego nke 84% mebiri site na 50%, ọ nwere ike nweta ike karịa 2.5MJ/cm3.

④ Ọrụ ụda dị mma: 1. Ọrụ mkpuchi ụda ( cell mechiri emechi): MgbeUgboro ugboro ụda ụda dị n'etiti 800-4000HZ, ọnụọgụ mkpuchi ụda nke ụfụfụ aluminum mechiri emechi dị n'elu 0.9. 2. Nrụpụta ụda ụda (micro site na oghere na site na oghere): Mgbe ụda ụda ụda dị n'etiti 125-4000HZ, ọnụọgụ mmịpụta ụda kachasị nke ụfụfụ aluminum site na oghere nwere ike iru 0.8, na nkezi ụda absorption ọnụọgụ nke octave band. gafere 0.4.

⑤ Ọmarịcha nchekwa nchekwa elektrọnịkị: mgbe oge ikuku eletrọnịkị dị n'etiti 2.6-18GHZ, elektrọnik, ego mkpuchi nwere ike iru 60-90dB.

⑥ Ezi thermal Njirimara: The thermal conductivity nke mechiri emechi-cell aluminum ụfụfụ na a porosity nke 80-90% bụ 0.3-1W / m # 8226; k, Ẹkot marble. Igwe ụfụfụ nke aluminom site na oghere nwere ezigbo ọkụ ọkụ na-arụ ọrụ n'okpuru ọnọdụ convection na-amanye n'ihi njikọ nke pores.

⑦ adịghị ọkụ ma nwee ezigbo nguzogide okpomọkụ. □Ezigbo nguzogide corrosion, iguzogide ihu igwe, iru mmiri dị ala, enweghị ịka nká, anaghị egbu egbu.

⑧ Ọ dị mfe ịhazi: adaba maka ịkpụ, mkpọ ala, na ciment; enwere ike ịgbanye ya n'ụdị achọrọ site na ịkpụzi; ọ nwere ike iji organic ma ọ bụ Inorganic agba na-eji maka ọgwụgwọ elu; enwere ike ịkpụ ya akpụkpọ n'akụkụ abụọ iji mepụta bọọdụ dị arọ nke buru ibu, nke siri ike. Ogo oge dị ugbu a: 600x1200x5/10MM, 500x1000x5/10MM.

⑨ Ọ dị mfe ịwụnye: Enwere ike itinye ihe mkpuchi aluminom n'ebe dị elu na-enweghị ihe eji ebuli igwe, dị ka: ụlọ elu ụlọ, mgbidi na elu ụlọ, wdg, nwere ike jikọọ ma dozie ya site na usoro igwe ma ọ bụ ozugbo na kposara, ma ọ bụ na ha nwere ike. a ga-mado na mgbidi ma ọ bụ n'uko na adhesives.

⑩ The "Sanwichi" Ọdịdị kpụrụ site mkpa metal efere-aluminom ụfụfụ- na mkpa metal efere ketara uru nke aluminum ụfụfụ Njirimara dị iche iche na elu ekwe ike, ike ga-eji dị ka ọhụrụ ụlọ ihe, elu-rigidity structural akụkụ nke Rolling ngwaahịa, wdg.

2. Atụmatụ nhazi

• Oghere dị ukwuu bụ 0.3-7mm;
• Akwa porosity na-achịkwa: 63%-90%;
• Ebe a kapịrị ọnụ bụ 10-45cm2 / cm3;
• Ọdịdị cell dị iche iche; cell mechiri emechi, site na cell na micro site na cell aluminum foam;
• Ihe mejupụtara na ihe owuwu pore nke usoro ígwè ahụ bụ nke a na-achịkwa, nke nwere ike ime mgbanwe dị iche iche.

3. Oke ngwa

Ntinye ụda na ihe mkpuchi ụda: Enwere ike iji aluminom foamed mee ihe maka njikwa mkpọtụ nke okporo ụzọ okporo ụzọ obodo, okporo ụzọ dị elu, tunnels dị n'okpuru ala, ngwá ọrụ ígwè ọrụ, na imeziwanye ọnụ ụlọ dị egwu, ụlọ ọrụ multi-function na mmetụta ụda ime ụlọ ndị ọzọ. A na-ejikọta ụfụfụ aluminom na-ada ụda na ihe owuwu ma ọ bụ ígwè ma wuo ya n'akụkụ abụọ nke viaducts na okporo ụzọ ọkụ dị ka nnukwu mgbidi na-adọrọ adọrọ, nke nwere ike ibelata mkpọtụ okporo ụzọ obodo. Enwere ike iji mkpuchi mkpuchi aluminum foamed maka mwepu mkpọtụ n'ime ụlọ kọmpụta ụlọ ọrụ, igwe na akụrụngwa, na ebe a na-ewu ihe n'èzí, na-edozikwa oke oke nke ihe na-anabata ụda olu ugbu a dị ka ajị iko na asbestos.

4. Mpaghara ngwa

Aluminom foamed nwere ike chepụta ihe ndị achọrọ zuru oke site n'ịgbanwe njupụta ya na nhazi pore. Nke a bụ ịma mma nke ihe a pụrụ iche. Ya mere, a na-eji ya eme ihe n'ọtụtụ ebe.